The researchers found an average of around 100 microplastic particles per liter in glass bottles of soft drinks, lemonade, iced tea and beer. That was five to 50 times higher than the rate detected in plastic bottles or metal cans.
“We expected the opposite result,” Ph.D. student Iseline Chaib, who conducted the research, told AFP.
“We then noticed that in the glass, the particles emerging from the samples were the same shape, color and polymer composition—so therefore the same plastic—as the paint on the outside of the caps that seal the glass bottles,” she said.
The paint on the caps also had “tiny scratches, invisible to the naked eye, probably due to friction between the caps when there were stored,” the agency said in a statement.
This could then “release particles onto the surface of the caps,” it added.
Title seems misleading.
As the micro plastics were found on the paint outside the bottle cap. It seems complicate that that ended on the drink itself. Unless you are licking the bottle cap it doesn’t seem that relevant.
The paint on the caps also had “tiny scratches, invisible to the naked eye, probably due to friction between the caps when there were stored,” the agency said in a statement.
This could then “release particles onto the surface of the caps,” it added.
Paint scratches off the outside, then sticks to the inside and makes it into the drink.
Wait…we not licking bottle caps anymore?!
In a bizarre twist, plastic bottles have been found to contain alarming levels of microglass.
You mean sand?
We just need glass caps then
When I was a kid they were made from metal
When I was a kid they were made from cork.
How are you still alive?🙈
They are still made from cork.
For water bottles?where?
No, wine.
It actually exists for some brands of wine. It’s annoying to open though.
Just pour it from the glass bottle to the plastic bottle. Problem solved
So nothing coupled to the glass but rather the cap having a extra plastic layer on the wet side.
Sounds like we found the issue, now it’s just a matter of producers improving the caps
Nah ill just spend $50 to have a Congress member introduce a bill to make regulating microplastics illegal
Ha! Good one.
Only if it doesn’t cut it to record profits
Just use the plasticbottlecaps.
No, the paint on the outside.
Yes. So many people are misunderstanding this article… The microplastics are on the inside, in the drink, and they are bits of the paint from the exterior of bottle caps that stuck to the inside of other caps when the caps were all jumbled together in big bags before they were placed on the bottles.
That would be far more intuitive, but it’s not that - it’s the painted logo on the outside.
Step 1: Invent plastic bottles
Step 2: Pocket the cash
Step 3: Things got bad? Outsource the clean-up to the end user in the form of recycling
Step 4: Increase prices to account for recycling
Step 5: Laugh as the idiots actually recycle your shit
Step 6: Throw the whole shebang in the ocean or in landfills
Step 7: Pocket some more cash
Step 8: Pat yourself on your shoulder. You’ve done some capitalism.
You forgot the step where they invent a logo that looks almost the same as the recyclable logo and stick it on all plastics but it doesnt mean its recyclable but instead just says what kind of plastic it is.
Lets go back to corks
Corka Cola.
As someone in a cork industry, you really don’t want that.
What is this teasing? Elaborate.
It takes a lot of effort to soak the corks.
Its really hard to soak my own cork, so I just get my girlfriend to soak my cork instead.
I also get this guy’s girlfriend to soak my cork
Care to expand on why? I’ve had corks dissolve and break if I didn’t finish the drink quickly enough, just on liquor bottles that went unused for a year or so. Any other reason?
Slightly educated guess. True organic cork is produced by cutting the bark off specific trees. There are limited climates it grows. I would guess the scale with which we produce bottled drinks would require significantly more trees and labor that we currently have. And thus cork prices would skyrocket.
And you can’t really close them again.
Why?
Man on the surface this reeks of inside payoffs. I guess the technicality is plastic caps on glass bottles?? Which seems weird and nothing I’ve ever seen. Unless they’re referencing the seal on the inside of some metal caps on glass bottles? Either way, seems suspect. I’d assume that overall drinking from glass is safer, as with plastic on any timeline you’re dealing with the plastic breaking down and leaching chemicals and micro plastics into the liquid, which wouldn’t be an issue with glass.
Not plastic caps, plastic paint. The printing on bottlecaps is a polymer and it gets scuffed.
Odd. I would have thought that the paint, being on the exterior, wouldn’t leak into the beverage contained inside the glass.
But apparently, they found that blowing air over the caps reduced the amount of detected contamination by 60 per cent. So it seems like an easy fix that manufacturers can implement inexpensively (literally just an electric fan)
Unfortunately, it’s probably not going to be an electric fan, but compressed air. Even more unfortunately, compressed air turns out to be a major cost factor due to the cost of running compressors, which might prevent adoption.
The original paper mentions blowing the caps out with an “air bomb”, which I’m pretty sure is a mistranslation stemming from the French term “Bombe d’Air Comprimé”, i. e. an air duster, a can of compressed air. In an industrial setting, you’d use a compressor for this, naturally.
Or just not paint the caps, at least not with plastic.
There is a real reason that the caps are painted. Glass beverage bottles are usually stored in a crate and grabbed from the top, so the design on the lid is what restaurant or store employees used to distinguish what drink is contained within it. This allows employees to distinguish similar-coloured drinks (e.g. Coca-Cola vs Pepsi or two different brands of beer) just from looking down at the top of the bottle.
But there probably is a way to paint them without using plastics
Then stamp/engrave the caps paint isn’t needed
Which is easier? Squatting down to count how many caps say “Coca-Cola” or counting the number of bottles with red caps?
Wholly and entirely dependent on the designs. Even barely two-tone patterns (as in low contrast) can be easily distinguishable.
How exactly would that happen if the cap is ON the bottle?
You make a lot of them. They are flat. They get painted, they get punched out, (this is where the ‘magic’ happens) they get shuffled around to load into machines to put them on the bottles, they go through the machine and they get clamped to the bottles.
There! Instant plastics!
The paint itself on the outside of the bottle cap. The ultra thin layer of (apparently polymer a.k.a. plastic) paint that make the cap not just metal colored.
…do plastic bottles not have caps? I’m confused.
their caps are fully plastic, not painted metal. The non-screwtop metal caps need to be bent to release their grip on the bottle. That scrapes the paint off the metal cap.
it’s more likely that paint is scratched off by other caps, idk about metal caps but plastic ones are usually handled in bags, thrown into a cap feeder that aligns them and loads them into the capper. I expect metal caps to go through a similar process, and all that movement is bound to scratch it and send particles everywhere.
Ok, great find, we can simply switch the caps & solve the problem.
(The corps will do that, right??)But I wander with such tests … could there be any significant detection issues?
Did they have the proper equipment and processes? A methodological limitation to particle size maybe?
Coz some researches find higher concentrations than 100.But the plastic bottle can still create a lot more, surely.
Anyone drinking beer or soft drinks out of glass bottles probably isn’t worried about micro-plastics.
I like beer and would definitely prefer my beer not contain microplastics
Why?
Parent commneter implies that people who consume soft drinks or alcohol aren’t concerned about their health because these beverages are not healthy
What about kombucha? Ice tea? Water?!?! Would be nice to know that anything you consume regardless of how healthy or not doesn’t contain micro plastics or other contaminants.
You’re forgetting all the kombucha and juices that use glass bottles, and more so those than plastic. Though I think kombucha does that because the kombucha will eat through the plastic.
